Lost Mary disposable vapes are appreciated by users for their attractive design, a wide choice of flavors, easy-to-use devices, such as Lost Mary MO5000. However, users tend to experience problems, for instance, the device starts blinking when charging. It is important to know what these blinking lights are telling you to avoid complications that would upset the vaping process. In this article, some questions which may arise while using Lost Mary vape especially if it blinks during charging will be discussed, the meaning of the light indicators and the possible ways to solve them.
LED lights are used in many devices today to indicate particular states The general concept of the LED indicators can be explained by the following The LED indicator is an arrangement of a few LEDs that operate simultaneously to create a single symbol Several aspects need to be mentioned about the LED indicator First, the function of LED indicators is to demonstrate a specific state of the device Second, the LEDs which are used in indicators are arranged in a few groups, and they work simultaneously Third
Lost Mary vape comes with LED lights which have a number of uses as explained below; Those lights provide information concerning the power source, charging, and diagnostic indications of this apparatus. Acquainting yourself with these indicators will go a long way in helping you to solve problems, if any with ease.
- Red Light: Most commonly they median low power supply or an issue with the particular device.
- Green Light: Indicates that it is charged or it is working well.
- Flashing Lights: Can mean that the device is currently connecting to the charging source or that there is a problem with the device.
Possible Causes of Blinking While Charging
Low Battery Level
If the initial LED light on Lost Mary vape blinks while it is on the charging process, there are high chances that the battery is low. It automatically blinks when the battery power is-low and requires charging, provided the battery voltage is too low.
What to Do: Most of the time when you plug in your device into the charger there is a blinking light, you must allow it to fully charge. This may take 30 mins to 2 hours depending on how drained the battery is down to the last percent.
Charging Status
For new vapers, you will realize that when you connect your Lost Mary vape with a charging source, the LED light may blink or flash to show that the device is charging. This is normal and means the data device is ‘taking current’.
What to Expect: When you are charging the battery, you will see that the red light blinks, and once the battery is fully charged, the light glows steady green. If it stays blinking for an unusually long, then there are probable problems with the charger or connection.
Connection Issues
If your Lost Mary Mods have a blinking LED indicator while it is hooked to the charger even if correctly inserted, it may be because of an issue on the charger port.
What to Check: Check that your charger is well plugged in the electrical outlet and in the USB port of the vape. Check both ends for signs of dirt which might hinder a proper fit or damage in the joint that might hinder secure connection. By cleaning out any dust or lint from the charging port this tends to solve the problem.
Dirty Charging Port
A dusty or blocked charging port can hamper direct contact of the charger to your vape and cause blinking of lights during charging.
Cleaning Tips: Apply only a slight amount of pressure when scrubbing around the charging port use a small brush or compressed air to blow away any dust. Do not use sharp edges, screws or bolts that may have an injurious effect on the inner parts of the machine.
Device Malfunction
Sometimes, a blinking light is a message that can signify an internal issue with your Lost Mary vape. This could be as a result of various constraints arising from manufacturing, from drops or in the event that they have come into contact with moisture.
What to Do: If you think there is an issue, attempt to reset your device by unplugging this from power for some time then plug it in again. If issues are not resolved, then communication with the representatives of the customer support team or buying a new item may be the next step.
End of Life Indicator
Lost Mary disposable vapes do not require any charging and have a relatively short life. A common signal of its last leg of functionality is when your device starts blinking every now and then.
Signs of End of Life: However, if you still see blinking lights accompanied by reduced vapor production, then you know it’s time to say goodbye to the device. If this is done, it will only result in poor performance of the vape and disgusting tastes that an individual never wants to encounter.
Troubleshooting Steps
If your Lost Mary vape continues to blink while charging despite following these guidelines, consider these troubleshooting
steps:
Check Charger Compatibility: The best charger that you should use should be meeting the requirements of the Lost Mary device that you have. This means that when a mobile device is charged using an incompatible charger, it is bound to develop problems in charging
effectiveness.
- Try Different Power Sources: At other times, the wall outlets may not be well proof in giving current for charging. Perhaps try to use a new charger but insert it in another socket or use the USB of your computer.
- Inspect for Damage: The first thing to do is look for visible signs of damage both on your vape and charger. These damages will impact performance and safety; a crack in the wall, dent in a car, or frayed wire.
- Reset Your Device: Switching off your device for a few minutes then switching it on again has been known to fix some of minor problems that occur frequently.
- Contact Customer Support: If none of the above methods help and your Lost Mary vape is still blinking with no message, it’s time to get in touch with customer service. They get to offer you technical directions that are particular to your model and even circumstance.
Conclusion
It is crucial to know why Lost Mary vape blinks when it is in charging mode if you want to fully enjoy vaping. Knowing the LED indicators of the instrument and the likely problems like low battery, connectivity issues or possible fault, will help reduce instances of having your instrument out of use for long due to such problems.
At any given one moment, if you are quite unsure regarding the meanings of such blinking lights or the methods that must be employed to fix them, do not let hesitation overcome you; go through the user manuals or contact the customer support. If you want your Lost Mary vape and its offspring such as lost mary turbo or any other generation editions of this marvelous vaporizer to function to your satisfaction to the best of its capabilities and to the ultimate of its durability, then you must do the following for it and for its longevity.
